Universal Marine Clear Bowl Fuel Filter Water Separator Kit Outboard Filters x2

• FREE POST AUSTRALIA WIDE!
• 2 X Universal Fuel Filter Water Separator System.
• 10 Micron German Engineered Filter Media, Making Them One Of The Best Filtration Units On The Market.
• What makes it so good you ask? The o-ring does not compress and allow the filter to touch the housing, which then creates a leak. The O-rings are excellent quality.
• Anti- Corrosive Head.
• 100% Pressure Tested 
• Long Service Life.
• 2 x Hose Clamps Stainless Steel Are Included.
• Thread Type / Size: Mercury Thread 11/16" 16 T.P.I
• Note: Interchangeable With: MERC 35-60494-1
• Full Kit- All You Need To Keep Water Out Of Your Fuel System Protecting Your Engine.
• PART NO: 37318

INSTRUCTIONS:
Draining of water or replacement of element is determined by contamination level of fuel. Inspect the collection bowl for water daily and service as necessary. Replace element at least once a year or when a decrease of power is noticed.

To Drain Water

• • 1. Loosen self-venting drain plug to drain water from bowl into a container.
  • 2. Tighten drain.
  • 3. Use primer bulb to fill filter with fuel.
  • 4. Start engine and check ensure there are no leaks.

• • To Replace Element

• 1. Loosen self-venting drain plug and drain the element into a container.
• 2. Remove filter element from mounting bracket with bowl connected.
• 3. Remove bowl from filter element and clean o-ring gland on bowl. BOWL IS REUSABLE * DO NOT DISCARD.
• 4. Lubricate o-ring with oil or grease and install on bowl.
• 5. Install bowl onto new element, tighten by hand.
• 6. Lubricate filter top seal with oil or grease.
• 7. Fill filter/bowl assemble with clean fuel and attach onto mounting bracket, tighten by hand.
• 8. Start engine and check to ensure there are no leaks.